fatigue strength
英 [fəˈtiːɡ streŋθ]
美 [fəˈtiːɡ streŋθ]
疲劳强度
双语例句
- The fatigue strength can greatly be improved by the method of the engine crankshaft fillet rolling, but the deformation may be produced at the same time.
发动机曲轴圆角滚压可以极大地提高曲轴的疲劳强度，但滚压后会产生变形，传统的弯曲力校直方法会降低由滚压所产生的压应力。 - And when shot peening treater, the fatigue strength of the chian will improve 12.3%.
经喷丸处理链条疲劳强度可提高12.3%。 - High bending fatigue strength and contact fatigue strength are needed for heavy duty gear steels.
重载齿轮钢要求具有高的弯曲疲劳强度和接触疲劳强度。 - The effects of matrix strength on three-point bent fatigue strength for the nitriding parts made from the nitrided steel have been studied by changing tempering temperature during pre-treatment.
通过改变预处理回火温度，研究了基体强度对氮化钢渗氮件三点弯曲疲劳强度的影响。 - Latest Development of Fatigue Strength Analysis Technology for Welds in Steel Structures
钢结构焊缝疲劳强度分析技术的最新进展 - This paper summarize the permissible stress range method for fatigue strength analysis which was adopted in guidance of China Classification Society ( CCS).
文章总结了中国船级社疲劳强度评估方法中的许用应力范围方法。 - Fatigue Strength Evaluation of Aluminium Alloy Carbody of Vehicles by Large Scale Dynamic Load Test
利用大型动载荷试验评价车辆铝合金车体疲劳强度 - The Static Strength and Fatigue Strength Test for Welding Bogie Frames for Multiple Units
动车转向架焊接构架的静强度和疲劳强度试验 - A layer of hot-dipped galvanizing causes a considerable reduction in the fatigue strength.
热浸镀锌层引起疲劳强度的显著降低。 - Fatigue strength and failure mechanisms are presented.
将介绍疲劳强度及失效机制。 - As carbon content increasing, the grain coarsening of CGHAZ is inhibited, thus, the impact toughness and fatigue strength are significantly improved.
随着C含量提高，焊接粗晶区中的晶粒粗化被抑制，因此，使得冲击性能和疲劳强度被明显提高。 - P Where fatigue strength is required it shall be verified in accordance with EN10080.
当对疲劳强度有要求时，必须按照EN10080进行检验。 - Then, for fatigue strength analysis, local finite element models of the tubular joints are also formed.
其次，建立了管节点结构局部有限元模型进行疲劳强度分析。 - The fatigue strength of hardening and tempering coated specimens were higher than that of normalizing coated specimens.
在正火处理后，涂层试样的疲劳强度大于未涂层试样； - In selecting a material for a product such as a piston in an internal combustion engine, a designer is interested in properties such as strength, ductility, hardness, or fatigue strength.
在为一个产品选择材料上，譬如内燃机上的一个活塞，一个设计者感兴趣的特性是材料的长度，延展性，硬度或者疲劳强度等。 - Lastly, using fatigue reliability design method, this paper analyses the crane wheel according to the probability distribution of its working stress and fatigue strength.
最后，根据起重机车轮的工作应力和疲劳强度的概率分布，采用疲劳可靠性设计方法，对车轮进行了分析计算。 - Research on Enhancing the Contact Fatigue Strength of Cast Iron Machine Elements with Alloy Coating and Alloying
表面合金镀层和合金化提高铸铁机械零件接触疲劳强度研究 - Calculation of Dynamic Stress and Fatigue Strength of Crankshaft with Bush Deformation Included
计入轴瓦变形的曲轴动应力和疲劳强度计算 - Investigation on Bending Fatigue Strength of ADI Gears
奥贝球铁齿轮弯曲疲劳强度的试验研究 - Fatigue Strength Analysis of Bulk Carriers Based on Hot Spot Stress Method in CSR
基于CSR中热点应力的散货船疲劳强度分析 - A Study on Distribution Function of Fatigue Strength for the Roller Chain Material
滚子链材料疲劳强度分布函数的研究 - This paper presents a reliability design method for fatigue strength of steam turbine parts subjected to alternating and mean stess with random variable stress ratio.
本文介绍了应力幅和平均应力之比为随机变量时汽轮机零件疲劳强度的可靠性设计方法。 - Study on reduction factor of fatigue strength and dispersion coefficient of life in seam welded joints
缝焊接头疲劳强度降低系数和寿命分散系数的研究 - On fatigue strength test rig for rubber belt joint
橡胶带接头疲劳强度测试实验台的研究 - The effect of notch on the high cycle and low cycle fatigue strength of TC21 alloy at different temperatures has been investigated in this paper.
研究了缺口对TC21合金在不同温度高周和低周疲劳强度的影响。 - Fatigue failure is the most important failure mode in industrial applications of titanium alloys while fatigue strength is the critical mechanical property.
疲劳失效是钛合金工业应用中最重要的失效方式，疲劳强度是钛合金应用的关键性指标。 - P Prestressing tendons shall have adequate fatigue strength.
钢筋必须有足够的疲劳强度。 - A study on fatigue strength of laser welding of titanium and titanium alloy
激光焊接钛及钛合金腐蚀疲劳强度的研究 - However, a low fatigue strength detail or a large built-in defect may produce only a single significant crack.
但是，疲劳强度较低的细节部分或较大的内部缺陷可能只产生一条很大的裂纹。